The Brannstrom CleanTrack 1000 ODME unit can be upgraded for usage with ships carrying Bio-fuel blends, in compliance with MEPC.1/Circ.761 Rev1 and MEPC.240(65).
The CleanTrack 1000 B system is operating in a fully automatic mode, with automatic operation of the overboard and the slop tank valves, and logging all details about the discharge.
Also with this upgrade, Brannstrom proves their focus on innovation, automation and most importantly; continuity of your equipment. Nothing is more inconvenient than having equipment not suitable for the required usage. Rather than having an engineer attending your vessel, which can be both time and cost consuming, the Bio-Fuel Upgrade can be performed “over-the-air” for the newer range of ODME´s (serial numbers CT-576 and higher are fully compatible for this over-the-air upgrade.
Get in touch with us
Once ordered an unique activation code will be sent to the vessel, which only has to follow the link and the software will perform the upgrade automatically.
If an ODME unit with a serial number CT-576 or lower, a new CPU PCB is required to be installed in order to run the upgraded software.
In case you have an older CleanTrack 1000 with paper printer equipped, this unit needs to be replaced with a completely new CleanTrack 1000 unit in order to run the Bio-Fuel Upgrade.
Assistance with and realisation and installation of the above can be performed worldwide by Ravebo’s engineers. We would be happy to assist you in every way required.